Gloss Metallic Emerald Green Vinyl Film PET Liner

Size recommendations

Mirco:1.52m*10m(5*32.8ft)
Hatch/Convertible:1.52m*13m(5*42.6ft)
Coupe:1.52*15M(5*49.2ft)
Sedan/Small Van/Truck Cab:1.52*18M(5*59ft)
Small SUV:1.52*20M(5*65.6ft)
Large SUV/Sedan/MPV/Pickck Truck:1.52*23M(5*75.4ft)
Large Van:1.52*25M(5*82ft)

Gloss Metallic Emerald Green Vinyl Film PET Liner. Give your vehicle a custom paint job without the hassle of repainting your car or truck. The Gloss Metallic Emerald Green Vinyl Film PET Liner features a flexible coating that resists cracking, chipping and fading. This easy-to-install wrapping film also offers a water-resistant barrier to help protect your vehicle’s original finish.

Face Only Thickness: 3.7-4.1mil
Adhesive Thickness: 1.6mil
Type of film: High-grade polymeric vinyl plastic release liner film
Adhesive: Henkel solvent-based acrylic adhesive
PVC Face Film:90mic
Release liner: Plastic liner, PET, 75mic
Heat Temperature:-30 to +140 degrees
Storing period: 2 years if stored in +10°C to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.
Indoor life: 4 years.
Outdoor life: 3 years.
Dimensional stability: shrinkage less than 2%
Chemical Resistance: Resists Most Mild Acids, Mild Alkalis and Salt

1st layer: PET glossy protective film
Enhances the film's smoothness and light perception significantly.
2nd layer: specific vinyl protective film
Add at least 30% more shine to the film's surface while boosting its corrosion resistance.
3rd layer: modified casting grade polyurethane color layer
Make the car vinyl's colours more vibrant and rich.
4th layer: innovative polyvinyl chloride film
Make sure the film is robust and difficult to fade.
5th layer: high-performance low initial viscosity acrylic adhesive
Assured to leave no traces of adhesive, cause no harm, or cause the original automobile paint to peel off.
6th layer: PET German ancient air release craft
Excellent air conduction properties, simpler membrane construction