Gloss Metallic Silver Vinyl Wrap PET Liner

Size recommendations

Mirco:1.52m*10m(5*32.8ft)
Hatch/Convertible:1.52m*13m(5*42.6ft)
Coupe:1.52*15M(5*49.2ft)
Sedan/Small Van/Truck Cab:1.52*18M(5*59ft)
Small SUV:1.52*20M(5*65.6ft)
Large SUV/Sedan/MPV/Pickck Truck:1.52*23M(5*75.4ft)
Large Van:1.52*25M(5*82ft)

Gloss Metallic Silver Vinyl Wrap PET Liner is a gloss overall vinyl with a metallic finish and a rubberized contour edge. This custom cling can be applied to metal, fiberglass and many more substrates. The high gloss metal coating looks great on all vehicles including cars, trucks, motorcycles and RVs.

Face Only Thickness: 3.7-4.1mil
Adhesive Thickness: 1.6mil
Type of film: High-grade polymeric vinyl plastic release liner film
Adhesive: Henkel solvent-based acrylic adhesive
PVC Face Film:90mic
Release liner: Plastic liner, PET, 75mic
Heat Temperature:-30 to +140 degrees
Storing period: 2 years if stored in +10°C to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.
Indoor life: 4 years.
Outdoor life: 3 years.
Dimensional stability: shrinkage less than 2%
Chemical Resistance: Resists Most Mild Acids, Mild Alkalis and Salt

1st layer: PET glossy protective film
Enhances the film's smoothness and light perception significantly.
2nd layer: specific vinyl protective film
Add at least 30% more shine to the film's surface while boosting its corrosion resistance.
3rd layer: modified casting grade polyurethane color layer
Make the car vinyl's colours more vibrant and rich.
4th layer: innovative polyvinyl chloride film
Make sure the film is robust and difficult to fade.
5th layer: high-performance low initial viscosity acrylic adhesive
Assured to leave no traces of adhesive, cause no harm, or cause the original automobile paint to peel off.
6th layer: PET German ancient air release craft
Excellent air conduction properties, simpler membrane construction